WG Ball Opaque Enamel Powder – Red 610

WG Ball Opaque Enamel Powder – Red 610

Our range of opaque enamels are designed for use on copper, gold and silver.

The method of preparation of the fired trials was as follows:

• 0.9mm copper was used
• The actual size of the blanks is 50mm x 37mm
• Three thin coats of enamel were applied by dry dusting
• The blanks were counter enamelled
• Firing time was 2 minutes and the temperature was 800 centigrade

These enamels are supplied in powder form, ground to pass a 60’s mesh (250 micron) sieve.

The data sheet for these enamels can be downloaded here: Enamel Data Sheet

A guide to using the enamels can be downloaded here: Enamel User Guide